A lot can go wrong when working on scaffolding. We talked to safety
experts about some safety essentials when working from heights. Here are
your top 10 tips for scaffolding safety.
Despite the dangers it poses, however, working on a scaffold can be straightforward and safe if everyone involved follows procedures.
Provincial and federal occupational safety laws outline specific duties and responsibilities for employers, supervisors and workers. Knowing the rules and regulations is in everyone’s best interest.
1. Ensure everyone is properly trained. Safety regulations require that workers be trained in the design and operation of scaffolding. Training covers important safe work practices such as how to safely get on and off the scaffold (using an access ladder, not the scaffold frame — unless it is specially designed to be climbed and both hands are free to grab the rungs). It should also cover comprehensive fall protection training specific to the type of scaffolding, erecting and dismantling procedures for anyone involved in these activities, and a host of other lifesaving details.
3. Keep it legal. CSA standard committees have identified “rogue employers” as a significant obstacle to scaffold safety. “These are employers who fly under the radar and operate without a license,” says Jeet Tulshi, a CSA project manager. “They get some pick-up truck, rent a unit and hope they don’t get caught. They might import material from offshore and put it together without having it surveyed or reviewed by a professional engineer.” That was the case on Christmas Eve 2009, he says.
4. Know and respect the load capacity. According to the Ontario Ministry of Labour, failure to consider all the loads to which the scaffold may be subjected is one of the top things that go wrong at the design stage. The scaffold must be strong enough and capable of holding the desired weight, otherwise it could collapse. Don’t try to fit more workers on the platform than it can handle; don’t overload it with equipment and materials; and don’t rest anything on the guardrails.
6. Use guardrails. The design of the scaffold must incorporate guardrails on at least the three sides facing away from the building if the scaffold is more than 10 feet above ground. There should be a top rail, a mid rail and a bottom rail (toe board). If you must remove any guardrails while hoisting materials, replace them promptly. Wear fall protection at all times.
7. Inspect and maintain. Scaffolding must be routinely inspected by the supervisor and by a competent person — ideally a professional engineer or a person designated in writing by a professional engineer. In the case of a suspended platform, inspect and test all components including welds, stirrups, connecting pins, connecting plates, trusses, beams and working surface. Check that the lumber is of good quality. If any pieces get broken or damaged, replace them right away. Inspect frames, braces and other components for damage, bends and excessive rust or wear. Also check motors, platforms or wire ropes for damage from chemicals or corrosive material.
9. Keep your balance. A scaffold and its platform must be perfectly level (CSA standard says it mustn’t deviate from the vertical by more than 12 millimeters per three meters of height) to minimize the risk of workers losing balance and falling off. Particularly on swing stages, there must be an adequately weighted counterweight. Pay attention when working on a scaffold. Any sudden movements, or reaching too far from the platform, can cause a loss of balance.
10. Use appropriate PPE. This includes head protection, non-slip protective footwear and fall protection as required, in the form of a safety harness tied off to a solid structure, such as the building.
With all of these safety practices in place, working on a scaffold can be a high without the dangerous lows.
Article Credit - Michelle Morra is an award-winning freelance journalist based in Toronto. You may contact Michelle at writemorr@yahoo.ca
